US100 Pushbutton
The US100 Pushbutton is the most vandal resistant of the pushbuttons within our range. The stainless steel pressel is set within a stainless steel bezel, which it bottoms out on, making it highly resistant to impact attacks. Illumination is provided through a small insert moulded lens in the centre of the button. Although the US100 is extremely vandal resistant, its clean lines have made it very popular and it has been used in some of the most prestigious installations around the world as well as some of the harshest.
- Classic design
- Highly vandal resistant exceeds EN81-71 category 2
- Pressel/surround assembly is locked to the faceplate
Description
Body Type
- Micro movement
- Very shallow <20mm
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Wide range of connector options
- 1 n/o contact only (other options available through a relay board)
- UL/CSA approved
- Shallow
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Shunt boards for easy installation
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
- Micro movement
- Shallow, less than 20mm deep
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Push in Wago connectors
- Cable size up to 0.75mm2
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
Click options above for more detail
Material Finish
Stainless/Stainless
Illumination Colour
Red
Yellow
Green
Blue- White
Amber option also available
Illumination Action
- Before call acceptance – Both legend and halo are NON illuminated
- After call acceptance – Both legend and halo illuminated at FULL brightness any colour
- Before call acceptance – Both legend and halo are DIM illuminated any colour.
- After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.
Note: DIM and FULL brightness are the same colour.
- Before call acceptance – Both legend and halo are DIM illuminated white.
- After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.
Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.
- Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
- After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.
Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.
Click options above for more detail
Product Enquiry
Additional information
| Product Shape |
Round |
|---|---|
| Product Finish |
Stainless Steel |
| Body Type |
Compact 2 ,Compact 3 ,Compact 3 Profile |
| Illumination Colour |
Red ,Amber ,Green ,Blue ,White |
| Illumination Action |
Single ,Dual ,Bicolour ,Bicolour+ |
Related products
CA91 (US91) Pushbutton
The CA91 (US91) Pushbutton is a classic circular button with a clean timeless appearance. The illuminated legend provides clear identification and the button canbe illuminated in a wide variety of colours.
- 15mm high tactile legend
- Legend and halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US91-EN Pushbutton
The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
- 15mm high tactile legend
- High contrast between legend and pressel
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a black plate moulded with opal polycarbonate
US95 Plus Pushbutton
The circular shaped US95 Plus Braille Pushbutton meets all the requirements of the visually impaired. The extra large wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN Plus), or stainless steel.
- Extra-large (41mm dia) but still uses Compact Range bodies15mm high tactile legend
- Legend halo illumination
- Vandal resistant with stainless steel front
- EN81-71 cat 2
- Large range of pressel legends in new font
- Standard pressels are a stainless steel plate moulded with red or opal polycarbonate
CA20TT (US91-BB) Pushbutton
The CA20TT (US91-BB) slick design has a halo illumination and is vandal resistant. Two finish options are available: turned brass inner with mirrored stainless steel outer or turned stainless steel inner with mirrored stainless steel outer.
- Halo illumination
- Meets EN81-71 cat 2
- Vandal resistant with stainless steel & brass front
- Meets B44 & California Code
US89 Pushbutton
The timeless design of the US89 Pushbutton has proven to be very successful over the years. The obround shape is a refreshing alternative to the more common round or square shape.The US89 is available with Compact 2, Compact 3 or Compact 3P bodies.
The illuminated tactile legend clear identification and the button can be illuminated in a wide variety of colours.
- 13mm high tactile legend
- Legend & halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
M-20 RET Pushbutton
The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
- No studding required
- Separate legend and halo illumination
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 15mm high tactile legend (Moulded through)
- Meets EN81-70
Jumbo US90-30 Pushbutton
The US90-30 Jumbo Pushbutton is a classic square extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30 Jumbo has an identical appearance to the standard US90-15 and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 30mm high tactile legend + Braille (Embossed)
Jumbo US90-30EN Pushbutton
The US90-30EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Large range of pressel legends
- 30mm high tactile legend (Moulded through)
- Vandal resistant EN81-71 cat 2
- High contrast ratio between pressel and legend
- Meets EN81-70
Jumbo US91-30 Pushbutton
The US91-30 Jumbo Pushbutton is a classic round extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
- 30mm high tactile legend
- Matches standard US91-15 Compact 2 range
Jumbo US91-30EN Pushbutton
The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
Jumbo US95-30 Pushbutton
The US95-30 Braille Jumbo Pushbutton is a classic round extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend with illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30 Jumbo has an identical appearance to the standard US95 and so the two buttons can be used on faceplates together when appropriate.
US85 Pushbutton
The US85 benefits uses the full range of square Jumbo pressels. The button was designed not only to meet the requirements of EN81-70 Annex G.1, but also for use in larger buildings such as hospitals, airports and shopping centres, where the shear scale of the building necessitates a larger button. Using the EN range you have a black background with tactile legend (Braille optional) and this provides the contrast for EN81-70. Also available are stainless steel pressels again with tactile legends and optional Braille
- 30mm high tactile legend with optional Braille
- Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
- Large range of pressel legends
- Matching range includes keyswitches, rocker switches and indicators
- Vandal resistant
