US96-EN Pushbutton
The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant EN81-71 cat 1
- Large range of pressel legends
- High contrast ratio between pressel and legend
- Standard pressels are a black plate moulded with grey polycarbonate
Categories: ERM Pushbuttons, Standard
Description
Additional information
Product Shape |
Square |
---|---|
Product Finish |
Black, Green Exit Floor, Yellow Alarm |
Body Type |
Compact 2, Compact 2 Micro, Compact 3, Compact 3 Profile, EN |
Illumination Colour |
Red, Amber, Green, Blue, White |
Illumination Action |
Single, Dual, Bicolour, Bicolour+ |
Related products
Jumbo US95-30 Pushbutton
The US95-30 Braille Jumbo Pushbutton is a classic round extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend with illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30 Jumbo has an identical appearance to the standard US95 and so the two buttons can be used on faceplates together when appropriate.
CA20TT (US91-BB) Pushbutton
The CA20TT (US91-BB) slick design has a halo illumination and is vandal resistant. Two finish options are available: turned brass inner with mirrored stainless steel outer or turned stainless steel inner with mirrored stainless steel outer.
- Halo illumination
- Meets EN81-71 cat 2
- Vandal resistant with stainless steel & brass front
- Meets B44 & California Code
Jumbo US91-30EN Pushbutton
The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
M-20 RST Pushbutton
The new M-20 RST Pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
- No studding required
- Separate legend and halo illumination
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 15mm high tactile legend (Moulded through)
CA94 (US94) Pushbutton
The CA94 (US94) Pushbutton is a classic square button with a clean, timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.
- 15mm legend
- Classic design
- Complete pressel illumination
- Range of pressel legends
- Meets EN60529 (IP54)
CA91 (US91) Pushbutton
The CA91 (US91) Pushbutton is a classic circular button with a clean timeless appearance. The illuminated legend provides clear identification and the button canbe illuminated in a wide variety of colours.
- 15mm high tactile legend
- Legend and halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
M-20 RSB Pushbutton
The M-20 RSB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other lift applications. The button has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
- No studding required
- Separate legend and halo illumination
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 15mm high tactile legend + Braille (Moulded through)
US97-EN Pushbutton
The US97-EN Pushbutton has been designed to meet the requirements of EN81-70 and pr EN81-40/41 which requires the pushbutton legend to have a height of 15mm. The pushbutton benefits from a brightly illuminated white legend for easy viewing in darkness as well as daylight.
- 15mm tactile legend
- High contrast between legend and pressel
- Legend & halo illumination can be controlled individually
- Large range of pressel legendsVandal resistant and weatherproof
- Meets EN81-1/2, EN81-70, EN81-72, EN81-73, EN60529 (IP66 & IP67)
US90 Pushbutton
The US90 Pushbutton offers a clean square frontal appearance that will enhance any lift. The US90 is based on our original US81 Pushbutton and is particularly durable with reliability assured in even the harshest of conditions.
The illuminated legend provides clear identification and the button can be illuminated in a wide variety of colours.
- 13mm high flush legend
- Legend and halo illumination
- Vandal resistant with stainless steelfront EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or opal carbonate
Jumbo US96-30EN Pushbutton
The US96-30EN Braille Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96-30EN Jumbo has an identical appearance to the standard US96-EN and so the two buttons can be used on faceplates together when appropriate. The US96-30EN is available with the standard body or low profile, a useful option for surface mount.
Jumbo US90-30EN Pushbutton
The US90-30EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Large range of pressel legends
- 30mm high tactile legend (Moulded through)
- Vandal resistant EN81-71 cat 2
- High contrast ratio between pressel and legend
- Meets EN81-70
US90-15 Pushbutton
The US90-15 Braille Pushbutton meets all the requirements of the visually impaired. As well as the 15mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The illuminated tactile legend provides clear identification and the button can be illuminated in a wide variety of colours.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate