US90 Pushbutton
The US90 Pushbutton offers a clean square frontal appearance that will enhance any lift. The US90 is based on our original US81 Pushbutton and is particularly durable with reliability assured in even the harshest of conditions.
The illuminated legend provides clear identification and the button can be illuminated in a wide variety of colours.
- 13mm high flush legend
- Legend and halo illumination
- Vandal resistant with stainless steelfront EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or opal carbonate
Description
Body Type
- Micro movement
- Very shallow <20mm
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Wide range of connector options
- 1 n/o contact only (other options available through a relay board)
- UL/CSA approved
- Shallow
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Shunt boards for easy installation
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
- Micro movement
- Shallow, less than 20mm deep
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Push in Wago connectors
- Cable size up to 0.75mm2
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
Click options above for more detail
Material Finish
Brushed Stainless Steel
Mirror Stainless Steel
Brushed Brass
Mirror Brass
Illumination Colour
- Red
Yellow
Green
Blue
White
Amber option also available
Illumination Action
- Before call acceptance – Both legend and halo are NON illuminated
- After call acceptance – Both legend and halo illuminated at FULL brightness any colour
- Before call acceptance – Both legend and halo are DIM illuminated any colour.
- After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.
Note: DIM and FULL brightness are the same colour.
- Before call acceptance – Both legend and halo are DIM illuminated white.
- After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.
Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.
- Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
- After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.
Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.
Click options above for more detail
Product Enquiry
Additional information
| Product Shape |
Square |
|---|---|
| Product Finish |
Brushed Brass ,Brushed Stainless Steel ,Mirror Brass ,Mirror Stainless Steel |
| Body Type |
Compact 2 ,Compact 2 Micro ,Compact 3 ,Compact 3 Profile |
| Illumination Colour |
Red ,Amber ,Green ,Blue ,White |
| Illumination Action |
Single ,Dual ,Bicolour ,Bicolour+ |
Related products
CA91 (US91) Pushbutton
The CA91 (US91) Pushbutton is a classic circular button with a clean timeless appearance. The illuminated legend provides clear identification and the button canbe illuminated in a wide variety of colours.
- 15mm high tactile legend
- Legend and halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US91-EN Pushbutton
The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
- 15mm high tactile legend
- High contrast between legend and pressel
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a black plate moulded with opal polycarbonate
US96-EN Pushbutton
The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant EN81-71 cat 1
- Large range of pressel legends
- High contrast ratio between pressel and legend
- Standard pressels are a black plate moulded with grey polycarbonate
US95 Pushbutton
The circular shaped US95 Braille Pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN), or stainless steel.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US95-EN Pushbutton
The circular US95-EN Braille Pushbutton meets all the requirements of the visually impaired. The Braille dots below the legend are Standard English Braille. The pressel background is black, providing good contrast with legend and faceplate and meets the requirement of EN81-70.
- 15mm high tactile legend
- Legend halo illumination
- Meets EN81-70
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends in new font
- High Contrast between pressel and legend
- Standard pressels are black anodized plate moulded with opal polycarbonate
M-20 RSB Pushbutton
The M-20 RSB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other lift applications. The button has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
- No studding required
- Separate legend and halo illumination
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 15mm high tactile legend + Braille (Moulded through)
US89 Pushbutton
The timeless design of the US89 Pushbutton has proven to be very successful over the years. The obround shape is a refreshing alternative to the more common round or square shape.The US89 is available with Compact 2, Compact 3 or Compact 3P bodies.
The illuminated tactile legend clear identification and the button can be illuminated in a wide variety of colours.
- 13mm high tactile legend
- Legend & halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
Jumbo US90-30EN Pushbutton
The US90-30EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Large range of pressel legends
- 30mm high tactile legend (Moulded through)
- Vandal resistant EN81-71 cat 2
- High contrast ratio between pressel and legend
- Meets EN81-70
Jumbo US91 Pushbutton
The US91 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US91 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Large range of pressel legends
- 30mm high tactile legend (Moulded through)
- Vandal resistant EN81-71 cat 2
- High contrast ratio between pressel and legend
Jumbo US91-30EN Pushbutton
The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
Jumbo US95-30EN Pushbutton
The US95-30EN Braille Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30EN Jumbo has an identical appearance to the standard US95-EN and so the two buttons can be used on faceplates together when appropriate.
CA20TT (US91-BB) Pushbutton
The CA20TT (US91-BB) optic pushbutton is a modern twist on a classic – a clean timeless appearance. The illuminated Braille Tag shows clear identification and can be illuminated in a wide variety of colours. This pushbutton is available with any of our standard circular pressels be that the Belly Button (shown here), the classic US91 blank, bulls-eye or legend – the choice is yours.
